Shawarwari kan glaze

Shawarwari masu amfani kan haɗawa, shafa glaze da gasa, da naku shawarwarin.

Buɗe asusu kyauta ko shiga don ajiye naku shawarwarin.

Shawarwari na gaba ɗaya

  • Ku kasance da tsari

    Ku kasance da tsari a cikin aikinku. Ku rubuta abin da kuke yi a hanya ɗaya kullum, kuma ku ajiye bayanan wuri ɗaya. Samar da kyakkyawan tsarin shafa glaze da haɗawa zai rage lokaci, wahala da kurakurai.

    Alamomi: tsari, hanyoyi, bayanai

  • Specific gravity (SG)

    Haɗa glaze ɗinku zuwa nauyi (density) ko specific gravity iri ɗaya kullum zai taimaka muku sosai wajen cimma burinku. Ku rubuta awon (ko density ko specific gravity) domin ku bi diddigin tasirin sauye-sauye.

    Alamomi: specific gravity, density, haɗawa

  • Gasar bisque

    Ku kafa tsarin gasar bisque iri ɗaya kullum, na cone da na saurin ɗaga zafi. Wannan zai kafa ma’auni don kayanku su riƙa shan glaze daidai gwargwado. Rage bambance-bambance a wannan sashi na aikin zai taimaka wajen bincike da sarrafa glaze.

    Alamomi: gasar bisque, bisque firing, bisc firing, bisque-firing, shiri, hanyoyi

  • Kada ku taɓa share da tsintsiya

    Kada ku taɓa share studio ko ɗakin glaze da tsintsiya. Hanya mafi kyau ta tsabtace ƙasa ita ce da mop mai jiƙe. Soson gini (contractor sponge) zai yi aiki sosai a wurin da ke da ɗaurin datti mai tauri. Ƙura sakamako ne da ba za a iya gujewa ba na aiki da yumɓu da kayan glaze, kuma share da tsintsiya yana tayar da ita.

    Alamomi: ƙura, haɗari, tsabtace wuri

  • Alamomi na dindindin

    Ku yi amfani da alamomi na dindindin a kan kayan glaze da gwangwanayen glaze. Wannan ya fi muhimmanci ninki biyu ga kaya masu haɗari, waɗanda suka zama ruwan dare a masu launin glaze, don haka kuma a glaze. Alamomin takarda ko na tef sukan cire idan sun jiƙe, kuma glaze cike yake da ruwa. Abu ne mai sauƙi a goge rubutun da bai shafi gwangwani ba kuma.

    Alamomi: hanyoyi, haɗari, ajiya

  • Epsom salts

    Ɗan kaɗan na epsom salts, cokali babba 1 - 2 ga 20 lb (fam), zai riƙe ƙwayoyin glaze a gauraye kuma ya hana tarin da ya yi tauri a ƙasan bokiti.

    Alamomi: kwanciyar glaze, haɗawa

  • Tayil ɗin glaze

    Za a iya yin tayil ɗin glaze da rami na inci 1/4, sannan a ɗaure shi a hannun bokitin glaze. Za a iya matsa tayil ɗin glaze (extrude) a kaurin da ya dace don ya yi kama da kayanku, a rubuta masa lambar batch da aka danna cikin yumɓun, kuma a shafa masa ɗigon slip ɗin da kuka fi so. Sannan za ku iya gane da kallo ɗaya yadda sakamakon zai kasance. Ku maimaita ga duk yumɓun da kuka saba amfani da su don samun jerin yiwuwar sakamako a hannunku.

    Alamomi: tayil ɗin glaze, tayil, alamomi

  • Kiln sitter

    Bayan kun sa cone a cikin kiln sitter, ku rufe shi da masking tape. Tef ɗin zai kare cone ɗin daga faɗuwa yayin loda tukwane, kuma yana ƙonewa ya ɓace da tsabta yayin gasa.

    Alamomi: kiln sitter, cone, cones, loda kiln